Rear Toyota to Chevy Spring Swap Kit Low Range Off Road

Why put a 1/2-ton Chevrolet leaf spring on a Toyota Hilux Pickup, 4Runner or Tacoma? Simply put - they ride like a dream on and off road! The difference between Chevy's springs and the stock Toyota's is unbelievable! The 63 inch long Chevy springs give you added flex and a softer ride and can be very affordable. Once you find leaf springs, you will need this kit to install them because the Chevy spring is 2.5 inch wide compared to the approximate 2.25 inch width of the Toyota leaf.

Since the Chevy leaf spring bushing is 3 inch wide and will not work with factory Toyota hangers, we designed this kit to work with the Toyota width hangers. The kit includes 6 inch eye-to-eye laser-cut and press-bent shackles. The rear upper shackle hanger is a Toyota hanger so, if you choose to go back to Toyota leaves in the future, you won't have to scramble trying to find another hanger. The 1/4-inch thick plate laser-cut and formed front hangers are sloped allowing you to easily slide over obstacles.
Kit includes all hardware needed for your spring installation:

• (2) Sloped Chevy Spring Hangers
• (2) CNC Laser-cut and CNC Press-bent Shackles
• (2) Rear Shackle Hangers with Bushings
• (2) 18MM Bolts and Crimp Nuts
• (4) 9/16 inch Bolts with Washers and Nuts
• (4) 9/16 inch U-bolts with Thick Washers and Hi-Nuts
• (2) HD U-bolt Plates

Note: 63 inch leaf springs are not included with this kit.